Kit Updates:

1:6 Nike Smoke

A 5/32" red bungee elastic shock cord has replaced the 3/4" flat braided shock cord.
A pre-assembled shock cord mount has replaced the old mount. It is pre-assembled to the correct length, includes anti-fraying ends and is more flexible than the previous mount.
The new screw eye is smaller to accommodate the new shock cord. Also included is a new plastic anchor that increases the thread size to prevent balsa separation.
New vacuum formed nose cone covers have replaced the plywood covers and pins.
Go to Nike Smoke instructions online for the most current instructions.

UPDATES:

A 5/32" red bungee elastic shock cord has replaced the 3/4" flat braided shock cord.
A pre-assembled shock cord mount has replaced the old mount. It is pre-assembled to the correct length, includes anti-fraying ends and is more flexible than the previous mount.
The new screw eye is smaller to accommodate the new shock cord. Also included is a new plastic anchor that increases the thread size to prevent balsa separation.
The G33-7 has been dropped as a recommended motor, replaced with the G33-5. This reflects a more accurate delay.
The Aerotech F23-4 Econojet has been added as a recommended motor.
Go to Nike Apache instructions online for the most current instructions.

UPDATES:

UPDATES:

A 5/32" red bungee elastic shock cord has replaced the 3/4" flat braided shock cord.
A pre-assembled shock cord mount has replaced the old mount. It is pre-assembled to the correct length, includes anti-fraying ends and is more flexible than the previous mount.
The new screw eye is smaller to accommodate the new shock cord. Also included is a new plastic anchor that increases the thread size to prevent balsa separation.
Go to Black Brant II instructions online for the most current instructions.

UPDATES:

A 5/32" red bungee elastic shock cord has replaced the 3/4" flat braided shock cord.
A pre-assembled shock cord mount has replaced the old mount. It is pre-assembled to the correct length, includes anti-fraying ends and is more flexible than the previous mount.
The new screw eye is smaller to accommodate the new shock cord. Also included is a new plastic anchor that increases the thread size to prevent balsa separation.
Go to Aerobee Hi instructions online for the most current instructions.